SLM materials.
Suited to the task.
Titanium, stainless steel and aluminium for complex metal parts. Compare alloys, strengths and other technical properties.
No matching material found. Try a different search term.
TITANIUM ALLOY
TITANIUM ALLOY
Titanium alloy Ti₆Al₄V is widely used by engineers and manufacturers. It combines high tensile strength and toughness with low weight, exceptional corrosion resistance and tolerance of extreme temperatures. It allows precise parts, thin walls, robust structures and complex components for a wide range of applications.
| Parameter | Method | Result |
|---|---|---|
| Hardness | ISO 6597-1:03-2006 | 340 HV |
| Density | WGE-Prod-067EN | 4.39 g/cm³ |
| Relative density | WGE-Prod-067EN | 99.5% |
| Tensile strength | DIN EN ISO 6892-1:2009 | 980 MPa |
| Elongation at break | DIN EN ISO 6892-1:2009 | 14% |
| Yield strength | DIN EN ISO 6892-1:2009 | 900 MPa |
| Elastic modulus | DIN EN ISO 6892-1:2009 | 110 GPa |
| Roughness Ra | ISO 4287 / AITM 1-00070 | 20 µm |
| Roughness Rz | ISO 4287 / AITM 1-00070 | 80 µm |
| Colour | Metallic |
STAINLESS STEEL SS316L
STAINLESS STEEL SS316L
Stainless steel SS316L suits corrosive and high-temperature environments, including specialised pharmaceutical and photographic equipment, thanks to its weldability and resistance to corrosive chemicals. Long used in CNC, it is also available for 3D printing. Additive manufacturing enables topology optimisation, hollow forms, complex components and lattices in metal. Post-processing can be demanding and requires trained specialists such as 3Dexperts.ch.
| Parameter | Method | Result |
|---|---|---|
| Hardness | ISO 6597-1:03-2006 | 200 HV |
| Density | WGE-Prod-067EN | 7.95 g/cm³ |
| Relative density | WGE-Prod-067EN | 99.50% |
| Tensile strength | DIN EN ISO 6892-1:2009 | 530 MPa |
| Elongation at break | DIN EN ISO 6892-1:2009 | 50% |
| Yield strength | DIN EN ISO 6892-1:2009 | 340 MPa |
| Elastic modulus | DIN EN ISO 6892-1:2009 | 180 GPa |
| Roughness Ra | ISO 4287 / AITM 1-00070 | 15 µm |
| Roughness Rz | ISO 4287 / AITM 1-00070 | 70 µm |
| Colour | Metallic |
ALUMINUM ALSI10MG
ALUMINUM ALSI10MG
AlSi10Mg aluminium is a fine metal powder for SLM printing. Lightweight yet strong, it suits many common applications, tolerates mechanical loads and high temperatures, and costs less than some specialised metals. We see it used in automotive, robotics, architecture and design. SLM can still involve significant time and cost: AlSi10Mg parts often require wire cutting, blasting, annealing, polishing and other finishing. An experienced service provider such as 3Dexperts.ch can coordinate these steps.
| Parameter | Method | Result |
|---|---|---|
| Hardness | ISO 6597-1:03-2006 | 100 HV |
| Density | WGE-Prod-067EN | 2.65 g/cm³ |
| Relative density | WGE-Prod-067EN | 99.0% |
| Tensile strength | DIN EN ISO 6892-1:2009 | 300 MPa |
| Elongation at break | DIN EN ISO 6892-1:2009 | 2% |
| Yield strength | DIN EN ISO 6892-1:2009 | 190 MPa |
| Elastic modulus | DIN EN ISO 6892-1:2009 | 70 GPa |
| Roughness Ra | ISO 4287 / AITM 1-00070 | 16 µm |
| Roughness Rz | ISO 4287 / AITM 1-00070 | 70 µm |
| Colour | Metallic |
These values come from our existing material overview and are for guidance. Suitability and binding requirements are clarified with your enquiry.
More metals for your project.
Copper and copper alloys, maraging steel and Inconel extend the selection. We discuss availability and properties with you.
Discover copperThe right material.
Compare materials by technology and select them together.
The right finish.
These options depend on the material and part specifications.
Sand & glass bead blastingDetails ↗
PolishingDetails ↗
Heat treatmentDetails ↗
Fits, threads & insertsDetails ↗We confirm suitability based on the material, geometry and requirements.